Datasheet

21
Software and Hardware Solutions for the 32-bit Designer
PIC32 Touch Solutions
Enhanced mTouch Capacitive Touch Evaluation Kit
(DM183026-2)
The enhanced mTouch Capacitive
Evaluation Kit provides a simple
platform for developing a variety
of capacitive touch sense
applications using PIC16F,
PIC24F, PIC18F and PIC32
microcontrollers.
Kit Contents:
■ PIC16F CVD evaluation board
■ PIC18F CTMU evaluation board
■ PIC24F CTMU evaluation board
■ PIC32MX CVD evaluation board
■ Direct 8 keyboard
■ 12-Key matrix sensor board
■ 4-Channel slider sensor board
■ 2-Channel slider sensor board
■ PICkit serial analyzer
■ USB cable
PIC32 Capacitive Touch Evaluation Board
(AC323026)
The PIC32 mTouch Capacitive
Touch Evaluation Board is designed
to facilitate the development of
capacitive touch-based applications
using PIC32-series microcontrollers.
This evaluation board includes an
on-board PICkit serial interface, an
ICSP™ header, a USB connector
(for power only), and 16 LEDs. The board also includes a
24-pin header that can be used to interface the 2-channel
and 4-channel slider plug-in boards, the 12-matrix key
plug-in board and the 8-direct key plug-in board. These
plug-in boards are included in the mTouch Capacitive Touch
Evaluation Kit (sold separately, DM183026-2).
Key Features:
■ PICkit serial interface via an on-board ICSP header
■ USB connector (for power only)
■ 16-bit LED display
PIC32MX CTMU Evaluation Board (AC323027)
The PIC32 CTMU Evaluation
Board is designed to facilitate the
development of capacitive touch-
based applications using the low-
cost high-performance PIC32 MX1/
MX2 series microcontrollers. This
evaluation board includes an on-board
PICkit serial interface, an ICSP header,
a USB connector (for power only), and
16 LEDs. The board also includes a 24-pin header that
can be used to interface the 2-channel and 4-channel
slider plug-in boards, the 12-matrix key plug-in board and
the 8-direct key plug-in board. These plug-in boards are
included in the mTouch Capacitive Touch Evaluation Kit
(sold separately, DM183026-2).
Key Features:
■ PICkit serial interface via an on-board ICSP header
■ On-board PIC32MX250F128D
■ USB connector (for power only)
■ 16-bit LED display