Datasheet

20
Software and Hardware Solutions for the 32-bit Designer
Display Boards
Graphics Display Truly 3.2" 320 × 240 Board
(AC164127-4)
The Graphics Display Truly
3.2" 240 × 320 Board is
a demonstration board
for evaluating Microchip’s
graphic display solution and
graphics library for 16- and
32-bit microcontrollers.
Key Features:
■ 3.2 QVGA (320 × 240) TFT LCD with 18-bit parallel
RGB interface
■ Resistive 4-wire touch screen
Graphics Display Powertip 4.3" 480 × 272 Board
(AC164127-6)
The Graphics Display Powertip
4.3" 480 × 272 Board is
a demonstration board
for evaluating Microchip’s
graphic display solution and
graphics library for 16- and
32-bit microcontrollers.
Key Features:
■ Powertip PH480272T-005-I11Q TFT module
■ 4.3 WQVGA (480 × 272) TFT LCD with 24-bit parallel
RGB interface
■ Resistive 4-wire touch screen
Graphics Display Truly 5.7" 640 × 480 Board
(AC164127-8)
The Graphics Display Truly
5.7" 640 × 480 Board is a
demonstration board for evaluating
Microchip graphic display solution
and graphics library for 16- and
32-bit microcontrollers.
Key Features:
■ TFT Display with 24-bit parallel RGB interface and
4-wire, resistive-touch interface
■ Resistive-touch controller (AR1020) interfaced to the
MCU through the SPI module
■ Additional direct interface to MCU for 4-wire, resistive-
touch signals
Graphics Display Truly 7" 800 × 480 Board
(AC164127-9)
The Graphics Display Truly
7" 800 × 480 Board is a
demonstration board for evaluating
Microchip’s graphic display solution
and graphics library for 16- and
32-bit microcontrollers.
Key Features:
■ TFT Display with 24-bit parallel RGB interface and
4-wire, resistive-touch interface
■ Resistive-touch controller (AR1020) interfaced to the
MCU through the SPI module
■ Additional direct interface to MCU for 4-wire,
resistive-touch signals
Graphics Display Prototype Board (AC164139)
The Graphics Display Prototype
Board (set of three) provides an easy
path to integrate various graphics
LCD panels.
Key Features:
■ Microchip display connector V1
■ Footprints of fl at fl exible connectors (FFC) with up to
50-pins with varying pitch sizes (1.0, 0.8, 0.7, 0.6,
0.5 mm), and VESA FPDI-1
■ Prototyping area for power supply circuits
■ Flexible mapping of V1 connector signals to FFC
connector signals
■ Compatible with Prototype PICtail Plus Daughter
Board (AC164126)