Datasheet

17
Software and Hardware Solutions for the 32-bit Designer
Starter Kits
Microstick II (DM330013-2)
Microstick II delivers a
complete development
hardware platform for
Microchip’s 16-bit and
32-bit microcontrollers and digital signal controllers. It’s
the perfect solution to those looking for a low-cost, easy-to-
use development platform. The USB-powered kit includes
an on-board debugger/programmer, a DUT socket for
easy device swapping, a user LED and reset button. It is
designed for insertion into a standard prototyping board
for easy connection to additional circuitry. This extremely
portable kit is about the size of a stick of gum.
Key Features:
■ Integrated USB programmer/debugger, no external
debugger required
■ USB powered: ease of use, no external power required
■ DUT socket: fl exible, easy device replacement
■ 0.025" pin headers, enables plug-in to breadboard with
room for jumper wires
■ Small size: smaller than a stick of gum at 20 × 76 mm,
easily portable
■ On-board user LED and reset switch
PIC32MZ EC Starter Kit (DM320006)
The PIC32MZ EC Starter Kit
provides the easiest and lowest-
cost method to experience the
high performance and advanced
peripherals integrated in the
PIC32MZ Embedded Connectivity
MCUs. This starter kit features a
socket that can accommodate 10/100 Ethernet transceiver
(RJ-45) plug-in connectors from various vendors for
prototyping and development.
Key Features:
■ On-board high-performance PIC32MZ: 200 MHz, 2 MB
Flash and 512 KB RAM
■ Integrated debugger/programmer
■ USB powered
■ 10/100 Ethernet development using PIC32 MCUs
■ CAN 2.0b, high-speed USB host, device, dual-role
and OTG
■ 4 MB SQI Flash
■ On-line tools and software download
■ Enables addition of PIC32 Expansion Board
PIC32MZ EC Starter Kit with Crypto Engine
(DM320006-C)
The PIC32MZ EC Starter Kit
with Crypto Engine provides
the easiest and lowest-cost
method to experience the high
performance and advanced
peripherals integrated in the
PIC32MZ Embedded Connectivity
MCUs. It features a crypto engine that reduces software
overhead and quickly executes actions such as encryption,
decryption, and authentication. This starter kit features
a socket that can accommodate 10/100 Ethernet
transceiver (RJ-45) plug-in connectors from various
vendors for prototyping and development.
Key Features:
■ On-board high-performance PIC32MZ: 200 MHz, 2 MB
Flash and 512 KB RAM with crypto engine
■ Integrated debugger/programmer
■ USB powered
■ 10/100 Ethernet development using PIC32 MCUs
■ CAN 2.0b, high-speed USB host, device, dual-role
and OTG
■ 4 MB SQI Flash
■ On-line tools and software download
■ Enables addition of PIC32 Expansion Board
PIC32 Ethernet Starter Kit II (DM320004-2)
The PIC32 Ethernet Starter
Kit II provides the easiest and
lowest-cost method to experience
10/100 Ethernet development
with PIC32 microcontrollers.
Combined with Microchip’s free
TCP/IP software, this kit gets your
project running quickly. The PIC32 microcontroller has an
available CAN 2.0b peripheral and USB host/device/OTG.
This starter kit features a socket that can accommodate
10/100 Ethernet transceiver (RJ-45) plug-in connectors
from various vendors for prototyping and development.
Key Features:
■ USB-powered board
■ USB and Ethernet connectors, user switches and LEDs
■ Integrated programmer/debugger
■ Standard A to mini-B cable for debugger
■ Standard A to micro-B cable for USB
application development
■ PIC32 running at 80 MHz with 512K Flash, 128K RAM,
8 channel DMA + 8 channel DMA dedicated to Ethernet,
CAN and USB
■ Expansion connector enables the addition of
Microchip’s PIC32 expansion boards or the creation of
your own board