Datasheet

Introduction

The bottom assembly of the board includes these key features, as indicated in

Figure 1-2:

1. PIC24FJ256GB106 USB microcontroller for on-board debugging.

2. Regulated +3.3V power supply for powering the starter kit through USB or

expansion board.

3. Connector for various expansion boards.

4. USB Type micro-AB receptacle for OTG and USB device connectivity for PIC32

OTG/device-based applications.

5. 50 MHz Ethernet PHY oscillator.

6. USB Host and OTG power supply for powering PIC32 USB applications.

FIGURE 1-2: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT LAYOUT (BOTTOM

VIEW)