Datasheet

Introduction
© 2013-2014 Microchip Technology Inc. DS70005147B-page 12
1.2 STARTER KIT FUNCTIONALITY AND FEATURES
1.2.1 Development Board
Representations of the layout of the development board included in the PIC32MZ
Embedded Connectivity (EC) Starter Kit are shown in Figure 1-1 and Figure 1-2.
The top assembly of the board includes these key features, as indicated in Figure 1-1:
1. PIC32MZ2048ECH144-I/PH or PIC32MZ2048ECM144-I/PH (Crypto Engine)
32-bit microcontroller.
2. Green power indicator LED.
3. On-board crystal or oscillator for precision microcontroller clocking (24 MHz).
4. USB connectivity for on-board debugger communications.
5. Green debug indicator LED.
6. Three push button switches for user-defined inputs.
7. Three user-defined indicator LEDs.
8. USB Type A receptacle connectivity for PIC32 host-based applications.
9. HOST mode power jumper.
10. Daughter board connectors for flexible Ethernet PHY options.
11. 32 kHz oscillator for RTCC and Timer1 (optional).
12. External 4 GB SQI memory for expanded memory applications.
13. Jumper for using or disconnecting the on-board debugger.
For more information on key features, refer to Chapter 2. “Hardware”.
FIGURE 1-1: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT LAYOUT (TOP VIEW)
Note: When running self-powered USB device applications, open the jumper JP1
to prevent possibly back-feeding voltage onto the V
BUS from one port on
the host to another (or from one host to another).
4
5
6
1
3
10
2
9
8
11
7
6
6
7
7
12
13