User manual

Multimedia Expansion Board User’s Guide
DS61160A-page 16 © 2010 Microchip Technology Inc.
2.2 STARTER KIT CONNECTOR
Any PIC32 starter kit can be used in conjunction with the Multimedia Expansion Board
through the PIC32 expansion connector, as shown in Figure 2-2. After connecting a
PIC32 starter kit, applications can be developed and run using the rich features of the
Multimedia Expansion Board. Table 2-1 provides information on starter kit pins and the
corresponding Multimedia Expansion Board device.
TABLE 2-1: STARTER KIT PIN DESCRIPTION
Starter Kit Connector (J3) Multimedia Expansion Board
Pin Description Pin Type Device Description
25 PMP Data <7:0> I/O Graphics Controller (SSD1926) 8-bit or 16-bit Data Bus
23 I/O
21 I/O
19 I/O
17 I/O
15 I/O
13 I/O
9I/O
7I/O
10 PMP Data <15:8> I/O
14 I/O
16 I/O
18 I/O
20 I/O
22 I/O
24 I/O
26 I/O
8 RG13 O Chip Select
101 RB10 O Register Select
39 RC3 I Wait Line
115 RA10 O Reset
103 RB11 I/O Touch Screen X+
105 RB12 O Y-
107 RB13 O X-
127 RB14 I/O Y+
72 RB0/CN2 I Joystick Left
70 RB1/CN3 I Up
66 RB3/CN5 I Down
64 RB4/CN6 I Right
36 RB15/CN12 I Fire
44 RD1 O LEDs LED1
42 RD2 O LED2
40 RD3 O LED3
35 RC1 O LED4
37 RC2 O LED5