User manual

XLP 8-Bit Development Board User’s Guide
DS41581A-page 16  2011 Microchip Technology Inc.
FIGURE 2-1: JUMPER TABLE
2.2 DEMONSTRATION PROGRAM OPERATION
The demonstration program uses the on-board LCD to display system status data, tem-
perature and time. The time can be set for the Real-Time Clock operation and be dis-
played in global time or AM/PM time. The program permits the user to select between
operation modes, each with its own current consumption values. This permits users to
experiment with the different Low-Power modes and XLP techniques, as well as make
direct measurements. The program flowchart is shown in Figure 2-2.