Datasheet

 2012-2013 Microchip Technology Inc. DS30009312B-page 45
PIC24FJ128GC010 FAMILY
4.0 MEMORY ORGANIZATION
As Harvard architecture devices, PIC24F micro-
controllers feature separate program and data memory
spaces and buses. This architecture also allows direct
access of program memory from the Data Space (DS)
during code execution.
4.1 Program Memory Space
The program address memory space of the
PIC24FJ128GC010 family devices is 4M instructions.
The space is addressable by a 24-bit value derived
from either the 23-bit Program Counter (PC) during pro-
gram execution, or from table operation or Data Space
remapping, as described in Section 4.3 “Interfacing
Program and Data Memory Spaces”.
User access to the program memory space is restricted
to the lower half of the address range (000000h to
7FFFFFh). The exception is the use of TBLRD/TBLWT
operations, which use TBLPAG<7> to permit access to
the Configuration bits and Device ID sections of the
configuration memory space.
Memory maps for the PIC24FJ128GC010 family of
devices are shown in Figure 4-1.
FIGURE 4-1: PROGRAM SPACE MEMORY MAP FOR PIC24FJ128GC010 FAMILY DEVICES
000000h
0000FEh
000002h
000100h
F8000Eh
F80010h
FEFFFEh
FFFFFEh
000004h
000200h
0001FEh
000104h
Configuration Memory Space
User Memory Space
Note: Memory areas are not shown to scale.
FF0000h
F7FFFEh
F80000h
800000h
7FFFFEh
Reset Address
Device Config. Registers
User Flash
Program Memory
(22K Instructions)
DEVID (2)
GOTO Instruction
Reserved
Alternate Vector Table
Reserved
Interrupt Vector Table
PIC24FJ64GC0XX
Reserved
Unimplemented
Read ‘0’
015800h
0157FEh
00AC00h
00ABFEh
Reset Address
DEVID (2)
GOTO Instruction
Reserved
Alternate Vector Table
Reserved
Interrupt Vector Table
PIC24F128GC0XX
Flash Config. Words
Device Config. Registers
Reserved
Unimplemented
Read ‘0’
User Flash
Program Memory
(44K Instructions)
Flash Config. Words