Datasheet

PIC24FJ128GC010 FAMILY
DS30009312B-page 430 2012-2013 Microchip Technology Inc.
TABLE 37-7: DC CHARACTERISTICS: CURRENT (BOR, WDT, DSBOR, DSWDT, LCD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C TA +85°C for Industrial
Parameter
No.
Typical
(1)
Max Units
Operating
Temperature
V
DD Conditions
Incremental Current Brown-out Reset (BOR)
(2)
DC25 3.1 5.0 A -40°C to +85°C 2.0V
BOR
(2)
4.3 6.0 A -40°C to +85°C 3.3V
Incremental Current Watchdog Timer (WDT)
(2)
DC71 0.8 1.5 A -40°C to +85°C 2.0V
WDT (with LPRC selected)
(2)
0.8 1.5 A -40°C to +85°C 3.3V
Incremental Current HLVD (HLVD)
(2)
DC75 4.2 15 A -40°C to +85°C 2.0V
HLVD
(2)
4.2 15 A -40°C to +85°C 3.3V
Incremental Current Real-Time Clock and Calendar (RTCC)
(2)
DC77 0.30 1.0 A -40°C to +85°C 2.0V
RTCC (with SOSC)
(2)
0.35 1.0 A -40°C to +85°C 3.3V
DC77A 0.30 1.0 A -40°C to +85°C 2.0V
RTCC (with LPRC)
(2)
0.35 1.0 A -40°C to +85°C 3.3V
Incremental Current Deep Sleep BOR (DSBOR)
(2)
DC81 0.11 0.40 A -40°C to +85°C 2.0V
Deep Sleep BOR
(2)
0.12 0.40 A -40°C to +85°C 3.3V
Incremental Current Deep Sleep Watchdog Timer Reset (DSWDT)
(2)
DC80 0.24 0.40 A -40°C to +85°C 2.0V
Deep Sleep WDT
(2)
0.24 0.40 A -40°C to +85°C 3.3V
Incremental Current LCD (LCD)
(2)
DC82 0.8 3.0 A -40°C to +85°C 3.3V LCD External/Internal;
(2,3)
1/8 MUX, 1/3 Bias
DC90 20 A -40°C to +85°C 2.0V
LCD Charge Pump;
(2,4)
1/8 MUX, 1/3 Bias
24 A -40°C to +85°C 3.3V
V
BAT A/D Monitor
(5)
DC91 1.5 A -40°C to +85°C 3.3V VBAT = 2V
4.0 A -40°C to +85°C 3.3V V
BAT = 3.3V
Note 1: Data in the Typical column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: Incremental current while the module is enabled and running.
3: LCD is enabled and running, no glass is connected; the resistor ladder current is not included.
4: LCD is enabled and running, no glass is connected.
5: The A/D channel is connected to the V
BAT pin internally; this is the current during A/D VBAT operation.