Datasheet

PIC24FJ128GC010 FAMILY

DS30009312B-page 300  2012-2013 Microchip Technology Inc.

R/W-0 U-0 R/W-0 U-0 U-0 U-0 U-0 U-0

MDEN —MSIDL— — — — —

bit 15 bit 8

U-0 R/W-0 R/W-0 R/W-0 U-0 U-0 U-0 R/W-0

— MDOE MDSLR MDOPOL — — —MDBIT

(1)

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 15 MDEN: DSM Module Enable bit

1 = DSM module is enabled and mixing input signals

0 = DSM module is disabled and has no output

bit 14 Unimplemented: Read as ‘0’

bit 13 MSIDL: DSM Stop in Idle Mode bit

1 = Discontinues module operation when device enters Idle mode

0 = Continues module operation in Idle mode

bit 12-7 Unimplemented: Read as ‘0’

bit 6 MDOE: DSM Module Pin Output Enable bit

1 = DSM pin output is enabled

0 = DSM pin output is disabled

bit 5 MDSLR: MDOUT Pin Slew Rate Limiting bit

1 = MDOUT pin slew rate limiting is enabled

0 = MDOUT pin slew rate limiting is disabled

bit 4 MDOPOL: DSM Output Polarity Select bit

1 = DSM output signal is inverted

0 = DSM output signal is not inverted

bit 3-1 Unimplemented: Read as ‘0’

bit 0 MDBIT: DSM Manual Modulation Input bit

(1)

1 = Carrier is modulated

0 = Carrier is not modulated

Note 1: The MDBIT must be selected as the modulation source (MDSRC<3:0> = 0000).