Datasheet

PIC24FJ128GC010 FAMILY
DS30009312B-page 188  2012-2013 Microchip Technology Inc.
REGISTER 11-4: ANSD: PORTD ANALOG FUNCTION SELECTION REGISTER
R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1
ANSD15
(1)
ANSD14
(1)
ANSD13
(1)
ANSD12
(1)
ANSD11 ANSD10 ANSD9 ANSD8
bit 15 bit 8
R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 U-0 R/W-1
ANSD7 ANSD6 ANSD5 ANSD4 ANSD3 ANSD2
— ANSD0
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-2 ANSD<15:2>: Analog Function Selection bits
(1)
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
bit 1 Unimplemented: Read as ‘0’
bit 0 ANSD0: Analog Function Selection bit
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
Note 1: These bits are not available in 64-pin devices.
REGISTER 11-5: ANSE: PORTE ANALOG FUNCTION SELECTION REGISTER
(1)
U-0 U-0 U-0 U-0 U-0 U-0 R/W-1 U-0
— — — — — — ANSE9 —
bit 15 bit 8
R/W-1 R/W-1 R/W-1 R/W-1 U-0 U-0 U-0 U-0
ANSE7 ANSE6 ANSE5 ANSE4
— — — —
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-10 Unimplemented: Read as ‘0’
bit 9 ANSE9: Analog Function Selection bit
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
bit 8 Unimplemented: Read as ‘0’
bit 7-4 ANSE<7:4>: Analog Function Selection bits
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
bit 3-0 Unimplemented: Read as ‘0’
Note 1: This register is not available in 64-pin devices.