Datasheet

 2013 Microchip Technology Inc. DS30003030B-page 273
PIC24FV16KM204 FAMILY
Module Differential Current (IPD)
(3)
DC71 PIC24FV16KMXXX 0.50 — µA 2.0V
Watchdog Timer
Current:
WDT
0.70 1.5 µA 5.0V
PIC24F16KMXXX 0.50 — µA 1.8V
0.70 1.5 µA 3.3V
DC72 PIC24FV16KMXXX 0.80 — µA 2.0V
32 kHz Crystal with RTCC,
DSWDT or Timer1:
SOSC
(SOSCSEL = 0)
1.50 2.0 µA 5.0V
PIC24F16KMXXX 0.70 — µA 1.8V
1.0 1.5 µA 3.3V
DC75 PIC24FV16KMXXX 5.4 — µA 2.0V
HLVD
8.1 14.0 µA 5.0V
PIC24F16KMXXX 4.9 — µA 1.8V
7.5 14.0 µA
3.3V
DC76 PIC24FV16KMXXX 5.6 — µA 2.0V
BOR
6.5 11.2 µA 5.0V
PIC24F16KMXXX 5.6 — µA 1.8V
6.0 11.2 µA 3.3V
DC78 PIC24FV16KMXXX 0.03 — µA 2.0V
Low-Power BOR:
LPBOR
0.05 0.3 µA 5.0V
PIC24F16KMXXX 0.03 — µA 1.8V
0.05 0.3 µA 3.3V
TABLE 27-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (PIC24F16KM204)
2.0V to 5.5V (PIC24FV16KM204)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Device Typical
(1)
Max Units Conditions
Legend: Unshaded rows represent PIC24F16KMXXX devices and shaded rows represent PIC24FV16KMXXX devices.
Note 1: Data in the Typical column is at 3.3V, +25°C (PIC24F16KMXXX) or 5.0V, +25°C (PIC24FV16KMXXX)
unless otherwise stated. Parameters are for design guidance only and are not tested.
2: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as outputs and set
low. PMSLP is set to ‘0’ and WDT, etc., are all switched off.
3: The  current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.