Datasheet

 2013 Microchip Technology Inc. DS30003030B-page 149
PIC24FV16KM204 FAMILY
13.5 Auxiliary Output
The MCCPx and SCCPx modules have an auxiliary
(secondary) output that provides other peripherals
access to internal module signals. The auxiliary output
is intended to connect to other MCCP or SCCP
modules, or other digital peripherals, to provide these
types of functions:
• Time Base Synchronization
• Peripheral Trigger and Clock Inputs
• Signal Gating
The type of output signal is selected using the
AUXOUT<1:0> control bits (CCPxCON2H<4:3>). The
type of output signal is also dependent on the module
operating mode.
On the PIC24FV16KM204 family of devices, only the
CTMU discharge trigger has access to the auxiliary
output signal.
TABLE 13-5: AUXILIARY OUTPUT
AUXOUT<1:0> CCSEL MOD<3:0> Comments Signal Description
00 x xxxx Auxiliary output disabled No Output
01 0 0000 Time Base modes Time Base Period Reset or Rollover
10 Special Event Trigger Output
11 No Output
01 0 0001
through
1111
Output Compare modes Time Base Period Reset or Rollover
10 Output Compare Event Signal
11 Output Compare Signal
01 1 xxxx Input Capture modes Time Base Period Reset or Rollover
10 Reflects the Value of the ICDIS bit
11 Input Capture Event Signal