Datasheet

 2013 Microchip Technology Inc. DS30003030B-page 139
PIC24FV16KM204 FAMILY
REGISTER 11-2: ANSB: PORTB ANALOG SELECTION REGISTER
R/W-1 R/W-1 R/W-1 R/W-1 U-0 U-0 R/W-1 R/W-1
ANSB15 ANSB14 ANSB13 ANSB12
— — ANSB9 ANSB8
bit 15 bit 8
R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1
ANSB7 ANSB6
(1)
ANSB5
(1)
ANSB4 ANSB3
(1)
ANSB2 ANSB1 ANSB0
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-12 ANSB<15:12>: Analog Select Control bits
1 = Digital input buffer is not active (use for analog input)
0 = Digital input buffer is active
bit 11-10 Unimplemented: Read as ‘0’
bit 9-0 ANSB<9:0>: Analog Select Control bits
(1)
1 = Digital input buffer is not active (use for analog input)
0 = Digital input buffer is active
Note 1: The ANSB<6:5,3> bits are not available on 20-pin devices.
REGISTER 11-3: ANSC: PORTC ANALOG SELECTION REGISTER
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8
U-0 U-0 U-0 U-0 U-0 R/W-1 R/W-1 R/W-1
— — — — — ANSC2
(1,2)
ANSC1
(1,2)
ANSC0
(1,2)
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-3 Unimplemented: Read as ‘0’
bit 2-0 ANSC<2:0>: Analog Select Control bits
(1,2)
1 = Digital input buffer is not active (use for analog input)
0 = Digital input buffer is active
Note 1: These bits are not implemented in 20-pin devices.
2: These bits are not implemented in 28-pin devices.