Datasheet

PIC24F16KL402 FAMILY
DS31037B-page 204  2011 Microchip Technology Inc.
TABLE 26-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V
Operating temperature -40°C  T
A  +85°C for Industrial
Parameter No. Typical
(1)
Max Units Conditions
Power-Down Current (I
PD)
DC60 0.01 0.20 µA -40°C
1.8V
Sleep Mode
( 2 )
0.03 0.20 µA +25°C
0.06 0.87 µA +60°C
0.20 1.35 µA +85°C
0.01 0.54 µA -40°C
3.3V
0.03 0.54 µA +25°C
0.08 1.68 µA +60°C
0.25 2.45 µA +85°C
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated.
2: Base I
PD is measured with all peripherals and clocks disabled. All I/Os are configured as outputs and set
low; PMDx bits are set to ‘1’ and WDT, etc., are all disabled
TABLE 26-9: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V
Operating temperature -40°C  TA  +85°C for Industrial
Parameter No. Typical
(1)
Max Units Conditions
Module Differential Current (IPD)
DC71 0.21 0.65 µA 1.8V
Watchdog Timer Current
WDT
(2,3)
0.45 0.95 µA 3.3V
DC72
0.69
1.50
µA 1.8V
32 kHz Crystal with Timer1:
 SOSC (SOSCSEL = 0 )
( 2 )
1.00 1.50 µA 3.3V
DC75 5.24 — µA 1.8V
HLVD
(2,3)
5.16 11.00 µA 3.3V
DC76 4.15 9.00 µA 3.3V BOR
(2,3)
DC78 0.03 0.20 µA 1.8V
LPBOR
(2)
0.03 0.20 µA 3.3V
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated.
2: The  current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.
3: This current applies to Sleep only.