Information

Consumers’ desire for more engaging, easy-to-use and
upgradeable products is driving embedded designers to
add USB capabilities to their designs.
Microchip provides designers with a scalable choice of
integrated USB solutions across 8-, 16- and 32-bit PIC®
microcontrollers ranging from the space-saving 14-pin
devices to the feature-rich 100-pin USB On-the-Go (OTG)
products. This allows simple, compact designs to easily
grow to more capable designs as requirements demand.
In addition, Microchip offers highly configurable stand-
alone USB protocol converters that enable full-speed USB
connectivity in applications with a UART or SPI interface.
Microchip provides free source code for USB software
stacks and class drivers to shorten development time for
USB applications, including thumb drive boot loaders and
printer support. Supported classes include: audio, CDC,
HID, MSD, printer and custom. Microchip’s free USB host
stack, device stack and class drivers are available at:
www.microchip.com/usb.
PIC16F and PIC18F Family
■ Full-speed USB Device mode
■ 8–128 KB Flash, 512B-4 KB of RAM,
■ Up to 16 MIPS 8-bit devices
■ Up to 4 UARTs, 2 I
2
C™/SPI ports
■ Available in 14/20/28/44/64/80/100-pin packages
PIC24E Family
■ Full-speed USB Device, Host and OTG modes
■ 256–512 KB Flash, 32-52 KB RAM,
70 MIPS 16-bit devices
■ 4 UARTs, 2 I
2
C, 4 SPI ports with DMA
■ Available in 64/100/144-pin packages
PIC32 Family
■ Full-speed USB Device, Host and OTG Modes with
dedicated DMA Channels
■ 16–512 KB Flash, 4-128 KB RAM,
40 or 80 MHz MIPS® M4K® Core
■ Up to 6 UARTs, 5 I
2
C and 4 SPI ports,
up to 8 general purpose DMA channels
■ Available in 28/36/44/64/100-pin packages
Scalable and Integrated Solutions
Full-Speed USB and USB On-the-Go
PIC24F Family
■ Full-speed USB Device, Host and OTG modes
■ 32–256 KB Flash, 8-96 KB RAM,
16 MIPS 16-bit devices
■ Up to 4 UARTs, 3 I
2
C and 3 SPI ports,
DMA interface for data RAM access, display drivers
■ Available in 28/44/64/80/100-pin packages
dsPIC33E Family
■ Full-speed USB Device, Host and OTG modes
■ 256–512 KB Flash, 32-52 KB RAM,
70 MIPS 16-bit devices
■ 4 UARTs, 2 I
2
C and 4 SPI ports with motor control and
digital power peripherals
■ Available in 64/100/144-pin packages
Stand-alone USB Controllers
■ MCP2200 USB-to-UART Protocol Converter
■ MCP2210 USB-to-SPI Protocol Converter
■ USB 2.0 Full Speed
■ On-board EEPROM, GPIO, highly configurable,
small packaging
www.microchip.com/usb
2
Connectivity Solutions