Datasheet

PIC18F97J94 FAMILY
DS30575A-page 632  2012 Microchip Technology Inc.
TABLE 31-1: DC CHARACTERISTICS: POWER-DOWN AND SUPPLY CURRENT
PIC18F97J94 FAMILY (INDUSTRIAL)
31.2 DC Characteristics: Power-Down and Supply Current
PIC18F97J94 (Industrial)
PIC18F97J94 Family
(Industrial)
Standard Operating Conditions: 2V to 3.6V (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
Param
No.
Typ
(1)
Max Units Conditions
DC60 3.7 7.0 µA -40°C
2.0V
Sleep
(2)
3.7 7.0 µA +25°C
5.0 9.0 µA +60°C
9.0 18 µA +85°C
3.7 8.0 µA -40°C
3.3V
3.7 8.0 µA +25°C
5.0 11.0 µA +60°C
10 20 µA +85°C
DC61 0.07 0.55 µA -40°C
2.0V
Retention Sleep or
Retention Deep Sleep
(3)
0.09 0.55 µA +25°C
2.0 3.2 µA +60°C
7.0 8.5 µA +85°C
0.10 0.65 µA -40°C
3.3V
0.15 0.65 µA +25°C
2.0 3.5 µA +60°C
7.2 9.0 µA +85°C
DC70 0.06 0.5 µA -40°C
2.0V
Deep Sleep
0.08 0.5 µA +25°C
0.21 0.8 µA +60°C
0.41 1.5 µA +85°C
0.09 0.6 µA -40°C
3.3V
0.11 0.6 µA +25°C
0.42 1.2 µA +60°C
0.8 4.8 µA +85°C
0.4 3.0 µA -40°C
TO +85°C 0 RTCC with VBAT mode (LPRC or
SOSC)
(4)
Note 1: Data in the Typical column is at 3.3V, 25°C; typical parameters are for design guidance only and are not tested.
2: Retention regulator is disabled; SRETEN (RCON4<4>= 0), RETEN
(CONFIG7L<0>= 1).
3: Retention regulator is enabled; SRETEN (RCON4<4> = 1), RETEN
(CONFIG7L<0> = 0).
4: V
BAT pin is connected to the battery and RTCC is running with VDD = 0.
Param
No.
Device Typ Max Units Conditions
Supply Current (I
DD)
All Devices
22 55 µA -40°C to +85°C VDD = 2.0V
F
OSC = 31 kHz, RC_RUN
23 56 µA -40°C to +85°C V
DD = 3.3V
21 54 µA -40°C to +85°C VDD = 2.0V
F
OSC = 31 kHz, RC_IDLE
22 55 µA -40°C to +85°C V
DD = 3.3V