Datasheet

 2012 Microchip Technology Inc. DS30575A-page 631
PIC18F97J94 FAMILY
31.1 DC Characteristics: Supply Voltage
PIC18F97J94 (Industrial)
PIC18F97J94
(Industrial)
Standard Operating Conditions: 2V to 3.6V (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C
Param
No.
Symbol Characteristic Min Typ Max Units Conditions
D001 V
DD Supply Voltage 2.0 — 3.6 V
D001C AVDD Analog Supply Voltage VDD – 0.3 — VDD + 0.3 V
D001D AV
SS Analog Ground Potential VSS – 0.3 — VSS + 0.3 V
D001E VUSB3V3 USB Supply Voltage 3 3.3 3.6 V USB module enabled
(3)
D002 VDR RAM Data Retention
Voltage
(1)
1.2 — — V
D003 V
POR VDD/VBAT Start Voltage
to Ensure Internal
Power-on Reset Signal
— — 0.7 V See Section 5.2 “Power-on
Reset (POR)” for details
D004 SVDD VDD/VBAT Rise Rate
to Ensure Internal
Power-on Reset Signal
0.05 — — V/ms See Section 5.2 “Power-on
Reset (POR)” for details
D005 BVDD Brown-out Reset Voltage
BORV = 1
(2)
BORV = 0
1.8
2.0
1.88
2.05
1.95
2.20
V
V
D006 VVDDBOR 1.4V 2.0 V
D007 VVBATBOR 1.4V 1.95 V
D008 V
DSBOR 1.8
Note 1: This is the limit to which VDD can be lowered in Sleep mode, or during a device Reset, without losing RAM data.
2: The device will operate normally until Brown-out Reset occurs, even though VDD may be below VDDMIN.
3: V
USB3V3 should be connected to VDD.