Datasheet

PIC18F97J94 FAMILY

DS30575A-page 198  2012 Microchip Technology Inc.

(1)

R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

RDPU REPU RFPU RGPU RHPU RJPU RKPU RLPU

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown

bit 7 RDPU: PORTD Pull-up Enable bit

1 = PORTD pull-ups are enabled for any input pad

0 = All PORTD pull-ups are disabled

bit 6 REPU: PORTE Pull-up Enable bit

1 = PORTE pull-ups are enabled for any input pad

0 = All PORTE pull-ups are disabled

bit 5 RFPU: PORTF Pull-up Enable bit

1 = PORTF pull-ups are enabled for any input pad

0 = All PORTF pull-ups are disabled

bit 4 RGPU: PORTG Pull-up Enable bit

1 = PORTG pull-ups are enabled for any input pad

0 = All PORTG pull-ups are disabled

bit 3 RHPU: PORTH Pull-up Enable bit

1 = PORTH pull-ups are enabled for any input pad

0 = All PORTH pull-ups are disabled

bit 2 RJPU: PORTJ Pull-up Enable bit

1 = PORTJ pull-ups are enabled for any input pad

0 = All PORTJ pull-ups are disabled

bit 1 RKPU: PORTK Pull-up Enable bit

1 = PORTK pull-ups are enabled for any input pad

0 = All PORTK pull-ups are disabled

bit 0 RLPU: PORTL Pull-up Enable bit

1 = PORTL pull-ups are enabled for any input pad

0 = All PORTL pull-ups are disabled

Note 1: If a particular PORT is not available on a package, the corresponding RnPU register bit will be

unimplemented and read back as ‘0’.