Datasheet

 2012 Microchip Technology Inc. DS30575A-page 111
PIC18F97J94 FAMILY
RPINR14_15 64-pin 80-pin 100-pin 1111 1111 1111 1111 uuuu uuuu
RPINR12_13 64-pin 80-pin 100-pin 1111 1111 1111 1111 uuuu uuuu
RPINR10_11 64-pin 80-pin 100-pin 1111 1111 1111 1111 uuuu uuuu
RPINR8_9 64-pin 80-pin 100-pin 1111 1111 1111 1111 uuuu uuuu
RPINR6_7 64-pin 80-pin 100-pin 1111 1111 1111 1111 uuuu uuuu
RPINR4_5 64-pin 80-pin 100-pin 1111 1111 1111 1111 uuuu uuuu
RPINR2_3 64-pin 80-pin 100-pin 1111 1111 1111 1111 uuuu uuuu
RPINR0_1 64-pin 80-pin 100-pin 1111 1111 1111 1111 uuuu uuuu
RPOR46 64-pin 80-pin 100-pin ---- 0000 ---- 0000 ---- uuuu
RPOR44_45 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR42_43 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR40_41 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR38_39 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR36_37 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR34_35 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR32_33 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR30_31 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR28_29 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR26_27 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR24_25 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR22_23 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR20_21 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR18_19 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR16_17 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR14_15 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR12_13 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR10_11 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR8_9 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR6_7 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR4_5 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR2_3 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RPOR0_1 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
UCFG 64-pin 80-pin 100-pin 00-0 -000 00-0 -000 uu-u -uuu
TABLE 5-3: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out
Reset
MCLR
Resets,
WDT Reset,
RESET Instruction,
Stack Resets
Wake-up via
WDT or Interrupt
Legend: u = unchanged; x = unknown; - = unimplemented bit, read as ‘0’; q = value depends on condition.
Shaded cells indicate that conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the
interrupt vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-2 for Reset value for specific condition.
5: Bits 7,6 are unimplemented on 64 and 80-pin devices.
6: If the V
BAT is always powered, the DSGPx register values will remain unchanged after the first POR.