Datasheet

PIC18F97J94 FAMILY
DS30575A-page 106  2012 Microchip Technology Inc.
LCDREFL 64-pin 80-pin 100-pin 0000 -000 uuuu -uuu uuuu -uuu
LCDSE7 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDSE6 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDSE5 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDSE4 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDSE3 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDSE2 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDSE1 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDSE0 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA63 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA62 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA61 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA60 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA59 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA58 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA57 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA56 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA55 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA54 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA53 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA52 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA51 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA50 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA49 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA48 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA47 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA46 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA45 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA44 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA43 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA42 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA41 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
LCDDATA40 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
TABLE 5-3: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out
Reset
MCLR
Resets,
WDT Reset,
RESET Instruction,
Stack Resets
Wake-up via
WDT or Interrupt
Legend: u = unchanged; x = unknown; - = unimplemented bit, read as ‘0’; q = value depends on condition.
Shaded cells indicate that conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the
interrupt vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-2 for Reset value for specific condition.
5: Bits 7,6 are unimplemented on 64 and 80-pin devices.
6: If the V
BAT is always powered, the DSGPx register values will remain unchanged after the first POR.