Datasheet

PIC18F97J94 FAMILY
DS30575A-page 104  2012 Microchip Technology Inc.
SSP2CON2 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
SSP2MSK 64-pin 80-pin 100-pin 1111 1111 1111 1111 uuuu uuuu
TMR5H 64-pin 80-pin 100-pin xxxx xxxx uuuu uuuu uuuu uuuu
TMR5L 64-pin 80-pin 100-pin xxxx xxxx uuuu uuuu uuuu uuuu
T5CON 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
T5GCON 64-pin 80-pin 100-pin 0000 0x00 0000 00x0 uuuu uuuu
CCPR4H 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCPR4L 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCP4CON 64-pin 80-pin 100-pin --00 0000 --00 0000 --uu uuuu
CCPR5H 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCPR5L 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCP5CON 64-pin 80-pin 100-pin --00 0000 --00 0000 --uu uuuu
CCPR6H 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCPR6L 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCP6CON 64-pin 80-pin 100-pin --00 0000 --00 0000 --uu uuuu
CCPR7H 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCPR7L 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCP7CON 64-pin 80-pin 100-pin --00 0000 --00 0000 --uu uuuu
TMR4 64-pin 80-pin 100-pin xxxx xxxx uuuu uuuu uuuu uuuu
PR4 64-pin 80-pin 100-pin 1111 1111 uuuu uuuu uuuu uuuu
T4CON 64-pin 80-pin 100-pin -000 0000 -000 0000 -uuu uuuu
SSP2BUF 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
SSP2ADD 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
ANCFG 64-pin 80-pin 100-pin ---- -000 ---- -000 ---- -uuu
DMACON2 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RCSTA4 64-pin 80-pin 100-pin 0000 000x 0000 000x uuuu uuuu
TXSTA4 64-pin 80-pin 100-pin 0000 0010 0000 0010 uuuu uuuu
BAUDCON4 64-pin 80-pin 100-pin 01x0 0000 01x0 0000 uuuu uuuu
SPBRGH4 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
SPBRG4 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RCREG4 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
TXREG4 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
CTMUCON 64-pin 80-pin 100-pin 0-00 0000 0-00 0000 u-uu uuuu
TABLE 5-3: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out
Reset
MCLR
Resets,
WDT Reset,
RESET Instruction,
Stack Resets
Wake-up via
WDT or Interrupt
Legend: u = unchanged; x = unknown; - = unimplemented bit, read as ‘0’; q = value depends on condition.
Shaded cells indicate that conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the
interrupt vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-2 for Reset value for specific condition.
5: Bits 7,6 are unimplemented on 64 and 80-pin devices.
6: If the V
BAT is always powered, the DSGPx register values will remain unchanged after the first POR.