Datasheet

 2012 Microchip Technology Inc. DS30575A-page 103
PIC18F97J94 FAMILY
SSP2CON3 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
CM2CON 64-pin 80-pin 100-pin 0001 1111 0001 1111 uuuu uuuu
CM3CON 64-pin 80-pin 100-pin 0001 1111 0001 1111 uuuu uuuu
CCPTMRS0 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
CCPTMRS1 64-pin 80-pin 100-pin 00-0 -000 00-0 -000 uuuu uuuu
CCPTMRS2 64-pin 80-pin 100-pin ---0 -000 ---0 -000 uuuu uuuu
RCSTA2 64-pin 80-pin 100-pin 0000 000x 0000 000x uuuu uuuu
TXSTA2 64-pin 80-pin 100-pin 0000 0010 0000 0010 uuuu uuuu
BAUDCON2 64-pin 80-pin 100-pin 01x0 0000 01x0 0000 uuuu uuuu
SPBRGH1 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RCSTA3 64-pin 80-pin 100-pin 0000 000x 0000 000x uuuu uuuu
TXSTA3 64-pin 80-pin 100-pin 0000 0010 0000 0010 uuuu uuuu
BAUDCON3 64-pin 80-pin 100-pin 01x0 0000 01x0 0000 uuuu uuuu
SPBRGH3 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
SPBRG3 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RCREG3 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
TXREG3 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
DSCONL 64-pin 80-pin 100-pin ---- -000 ---- -000 --- -uuu
DSCONH 64-pin 80-pin 100-pin 0-0- ---0 u-u- ---u u-u- ---u
DSWAKEL 64-pin 80-pin 100-pin 0000 0001 uuuu uuuu uuuu uuuu
DSWAKEH 64-pin 80-pin 100-pin ---- ---0 ---- ---u ---- ---q
DSGPR0
(6)
64-pin 80-pin 100-pin xxxx xxxx uuuu uuuu uuuu uuuu
DSGPR1
(6)
64-pin 80-pin 100-pin xxxx xxxx uuuu uuuu uuuu uuuu
DSGPR2
(6)
64-pin 80-pin 100-pin xxxx xxxx uuuu uuuu uuuu uuuu
DSGPR3 64-pin 80-pin 100-pin xxxx xxxx uuuu uuuu uuuu uuuu
SPBRGH2 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
SPBRG2 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
RCREG2 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
TXREG2 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
PSTR2CON 64-pin 80-pin 100-pin 00-0 0001 00-0 0001 uu-u uuuu
PSTR3CON 64-pin 80-pin 100-pin 00-0 0001 00-0 0001 uu-u uuuu
SSP2STAT 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
SSP2CON1 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
TABLE 5-3: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out
Reset
MCLR
Resets,
WDT Reset,
RESET Instruction,
Stack Resets
Wake-up via
WDT or Interrupt
Legend: u = unchanged; x = unknown; - = unimplemented bit, read as ‘0’; q = value depends on condition.
Shaded cells indicate that conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the
interrupt vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-2 for Reset value for specific condition.
5: Bits 7,6 are unimplemented on 64 and 80-pin devices.
6: If the V
BAT is always powered, the DSGPx register values will remain unchanged after the first POR.