Datasheet

PIC18F97J94 FAMILY
DS30575A-page 102  2012 Microchip Technology Inc.
ALRMRPT 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
ALRMVALH 64-pin 80-pin 100-pin xxxx xxxx uuuu uuuu uuuu uuuu
ALRMVALL 64-pin 80-pin 100-pin xxxx xxxx uuuu uuuu uuuu uuuu
RTCCON2 64-pin 80-pin 100-pin 0000 0000 uuuu uuuu uuuu uuuu
IOCP 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
IOCN 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
PADCFG1 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
CM1CON 64-pin 80-pin 100-pin 0001 1111 0001 1111 uuuu uuuu
ECCP2AS 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
ECCP2DEL 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
CCPR2H 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCPR2L 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
ECCP2CON 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
ECCP3AS 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
ECCP3DEL 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
CCPR3H 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCPR3L 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
ECCP3CON 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
CCPR8H 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCPR8L 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCP8CON 64-pin 80-pin 100-pin --00 0000 --00 0000 --uu uuuu
CCPR9H 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCPR9L 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCP9CON 64-pin 80-pin 100-pin --00 0000 --00 0000 --uu uuuu
CCPR10H 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCPR10L 64-pin 80-pin 100-pin xxxx xxxx xxxx xxxx uuuu uuuu
CCP10CON 64-pin 80-pin 100-pin --00 0000 --00 0000 --uu uuuu
TMR6 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
PR6 64-pin 80-pin 100-pin 1111 1111 1111 1111 uuuu uuuu
T6CON 64-pin 80-pin 100-pin -000 0000 -000 0000 -uuu uuuu
TMR8 64-pin 80-pin 100-pin 0000 0000 0000 0000 uuuu uuuu
PR8 64-pin 80-pin 100-pin 1111 1111 1111 1111 uuuu uuuu
T8CON 64-pin 80-pin 100-pin -000 0000 -000 0000 -uuu uuuu
TABLE 5-3: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register Applicable Devices
Power-on Reset,
Brown-out
Reset
MCLR
Resets,
WDT Reset,
RESET Instruction,
Stack Resets
Wake-up via
WDT or Interrupt
Legend: u = unchanged; x = unknown; - = unimplemented bit, read as ‘0’; q = value depends on condition.
Shaded cells indicate that conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the
interrupt vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-2 for Reset value for specific condition.
5: Bits 7,6 are unimplemented on 64 and 80-pin devices.
6: If the V
BAT is always powered, the DSGPx register values will remain unchanged after the first POR.