User manual

F1 LV Evaluation Platform Overview
 2012 Microchip Technology Inc. DS41629A-page 15
FIGURE 1-1:

1
11
121718
2 3 4 5 6 7 8
9
16
10
1315 14
1. Motor Parameters pull-down menu. Save
and recall to and from disc.
2. Speed control (relative 0 to 255):
• Commutation rate in open loop
• Drive level in closed loop
3. Zero cross advance/retard (BLDC only).
4. Motor drive voltage control (open loop). In
BLDC closed loop this control reverts to a
balance control.
5. BLDC open-loop single-step button.
6. Open/closed-loop control selection (BLDC
and stepper motors only).
7. Panic STOP button – Forces drive and com-
mutation to zero.
8. Motor direction selection.
9. Number of motor poles (BLDC only).
10. Serial port selection.
11. Serial link Open/Close button.
12. Motor type indicator.
13. Motor RPM – click label to update.
14. Initial drive level for start-up.
15. Initial speed setting for start-up.
16. PC Software version.
17. F1 LV Evaluation Platform software version.
18. Run time and static motor parameters tabs.