User manual

Main PSMC Configuration GUI
 2012-2013 Microchip Technology Inc. DS40001671B-page 33
FIGURE 2-23: 3-PHASE PWM
2.20 OUTPUT CONTROL
Channels are directed to the output pins through the output control. Open the output
control GUI shown in Figure 2-24 by clicking on the output control block in the main
GUI.
There are four selections for each channel in this control:
1. Output enable – switch furthest to the right
2. Output steering – input to the buffer on the left
3. Output polarity – bubble on output of the buffer figure
4. Shutdown level – switch at input to MUX