User manual

Main PSMC Configuration GUI
 2012-2013 Microchip Technology Inc. DS40001671B-page 25
2.19.4 PP: Push-Pull Mode
The Push-Pull mode is selected by clicking on the PP tab as shown in Figure 2-12. The
Push-pull mode is similar to the PWM mode, except that the PWM output alternates
between Channel A and Channel B every PWM period.
FIGURE 2-12: PUSH-PULL MODE
2.19.5 PPC: Push-Pull with Complementary Output
Push-Pull Complementary mode is selected by clicking on the PPC tab, as shown in
Figure 2-13. This mode is identical to the Push-Pull mode with the addition of two
complementary outputs on Channel E and Channel F.
Click on either dead-band block to open the dead-band control. See
Section 2.19.1 “Dead-Band Control” for more information.