User manual

PICDEM

Mechatronics Demo Board User’s Guide

WARRANTY REGISTRATION

Please complete the enclosed Warranty Registration Card and mail it promptly.

Sending in your Warranty Registration Card entitles you to receive new product

updates. Interim software releases are available at the Microchip web site.

RECOMMENDED READING

It is recommended that you become familiar with the documents listed below, prior to

using the PICDEM Mechatronics Demo Board.

PICkit™ 2 Microcontroller Programmer User’s Guide (DS51553)

Consult this document for instructions on how to use the PICkit 2 Microcontroller

Programmer hardware and software.

MPLAB

ICD 2 In-Circuit Debugger User’s Guide (DS51331)

Consult this document for information pertaining to Microchip’s In-Circuit Debugger,

MPLAB ICD 2. MPLAB ICD 2 utilizes the in-circuit debugging capability built into the

Flash devices.

PIC16F91X Data Sheet (DS41250)

Consult this document for information regarding the PIC16F91X 28/40/44-pin

Flash-based, 8-bit CMOS Microcontroller with LCD Driver device specifications.

PIC16F631/677/685/687/689/690 Data Sheet (DS41262)

Consult this document for information regarding the PIC16F631/677/685/687/689/690

20-pin Flash-based, 8-bit CMOS Microcontroller device specifications.

PIC12F508/509/16F505 Data Sheet (DS41236)

Consult this document for information regarding the PIC12F508/509 8/14-pin

Flash-based, 8-bit CMOS Microcontroller device specifications.

MPLAB

IDE, Simulator, Editor User’s Guide (DS51025)

Consult this document for more information pertaining to the installation and features

of the MPLAB Integrated Development Environment (IDE) Software.

Mechatronics Design Center

The Mechatronics Design Center (www.microchip.com\mechatronics) provides a

wealth of information on design applications involving Mechatronics. All documentation

is in Adobe

Acrobat

(pdf) format.