User manual

Preface
 2013 Microchip Technology Inc. DS40001721A-page 9
WARRANTY REGISTRATION
Please complete the enclosed Warranty Registration Card and mail it promptly.
Sending in the Warranty Registration Card entitles users to receive new product
updates. Interim software releases are available at the Microchip web site.
RECOMMENDED READING
This user's guide describes how to use the Hillstar Development Kit. Other useful
documents are listed below. The following Microchip documents are available and
recommended as supplemental reference resources.
•“MGC3130 GestIC
®
Design Guide: Electrodes and System Design
(DS40001716). This document describes the MGC3130 system characteristic
parameters and the design process. It enables the user to generate a good
electrode design and to parameterize the full GestIC system.
• “MGC3130 GestIC
®
Library Interface Description User’s Guide” (DS40001718).
This document is the interface description of the MGC3130’s GestIC Library. It
outlines the function of the Library’s message interface, and contains the
complete message reference to control and operate the MGC3130 system.
• “MGC3130 Single-Zone 3D Gesture Controller Data Sheet” (DS40001667).
Consult this document for information regarding the MGC3130 3D Tracking and
Gesture Controller.
• “MGC3130 Aurea Graphical User Interface User’s Guide” (DS40001681). This
document describes how to use the MGC3130 Aurea Graphical User Interface.