User manual

MGC3130 Hillstar Development Kit User’s Guide
DS40001721A-page 48  2013 Microchip Technology Inc.
FIGURE D-2: Update Driver Software
D.3 LOCATE DRIVER
1. Click Browse and navigate to the driver files on your local drive (refer to
Figure D-3).
2. Press Next and the driver will be installed.
FIGURE D-3: Browse for Driver Software
D.4 VERIFY COMMUNICATION
The driver is properly installed and the communication between the PC and the Hillstar
Development Board is successfully established when LED 1 and LED 2 blink
alternatively.