User manual

MGC3130 HILLSTAR DEVELOPMENT
KIT USER’S GUIDE
 2013 Microchip Technology Inc. DS40001721A-page 47
Appendix D. Driver Installation Manual
Go through the following steps to manually install the Windows CDC Driver on your PC.
D.1 OPEN DEVICE MANAGER
While the Hillstar Development Board is connected to your PC press Start, right-click
on Computers and select Manage. This will bring up the Computer Management
window shown in Figure D-1. On the left sidebar select Device Manager.
FIGURE D-1: COMPUTER MANAGEMENT
D.2 SELECT DEVICE
1. Right Click on GestIC Bridge and select Update Driver Software.
2. Select Search Method
3. The window shown in Figure D-2 will open. Choose Browse my Computer for
driver software.