User manual

MGC3130 HILLSTAR DEVELOPMENT
KIT USER’S GUIDE
 2013 Microchip Technology Inc. DS40001721A-page 35
Appendix A. Schematics
A.1 INTRODUCTION
This appendix contains the MGC3130 Hillstar Development Kit schematic and Bill of
Materials.
A.2 BILL OF MATERIALS
TABLE A-1: I
2
C™ TO USB BRIDGE BILL OF MATERIALS
Qty. Description Name
1 Connector, Mini USB 5-pin Type B, SMD BU1
1 Connector, 2 mm socket 6-pin, SMD BU2
1 Capacitor, 100 nF, 10%, X7R, SMD 0402 C1
3 Capacitor, 1 µF, 10%, X5R, 10 V, SMD 0402 C2, C3, C5
1 Capacitor, 10 µF, 20%, X5R, 6.3 V, SMD 0603 C4
3 LED, 571 nm, green clear, 0603 SMD D1, D2, D3
1 IC, MCP1801T LDO, Voltage Regulator, 3.3V, 150 mA, 5-Pin SOT-23 IC1
1 IC, PIC18F14K50 USB Flash Microcontroller, 20-Pin SSOP IC2
3 Resistor, 1 kΩ, 1%, 1/16W, SMD 0402 R3, R4, R6
1 Resistor, 150 kΩ, 1%, 1/16W, SMD 0402 R5
1 Resistor, 0 kΩ, 1%, 1/16W, SMD 0603 R7
1 Crystal, 12 MHz, 33 pF, SMD XTAL1
TABLE A-2: HILLSTAR – I
2
C™ TO USB BRIDGE MOUNTING OPTION
Qty. Description Name
1 Connector, 1 mm FPC 6-pin, SMD ST1