User manual

MGC3130 Hillstar Development Kit User’s Guide
DS40001721A-page 16  2013 Microchip Technology Inc.
TABLE 1-1: ELECTRODE DIMENSIONS
Sensitive Area 140x90 mm 95x60 mm
(1)
80x80 mm 100x50 mm 50x30 mm 30x30 mm
(2)
Version 1.0 1.0 1.0 1.0 1.0 1.0
Layer 22 2222
Aspect Ratio approx. 3:2 approx. 3:2 1:1 approx. 2:1 5:3 1:1
A 168 mm 120 mm 104 mm 128 mm 63 mm 49 mm
B 119 mm 85 mm 104 mm 72 mm 47 mm 49 mm
C 138 mm 95,7 mm 79.8 mm 103,6 mm 50 mm 31.8 mm
D 88,7 mm 60,5 mm 79.8 mm 99,6 mm 46 mm 27,3 mm
E 131,7 mm 91,7 mm 75,8 mm 99,6 mm 46 mm 27,3 mm
F 5 mm 5 mm 5 mm 5 mm 2,5 mm 3,5 mm
G 128 mm 85,7 mm 69,8 mm 93,6 mm 44 mm 25,8 mm
H 78,7 mm 50, 5 mm 69, 8 mm 36, 8 mm 24 mm 25,8 mm
Center Electrode
cross-hatching
3% 3% 5% 5% 5% 5%
Tx Electrode
cross-hatching
-under center
electrode
-outside center
electrode
50 %
20 %
50%
20%
50%
20%
50 %
20 %
50 %
20 %
50 %
20 %
Note 1: These dimensions are also valid for 95x60 mm sensor module.
2: These dimensions are also valid for 30x30 mm sensor module except the B dimension which is equal to
52 and Tx electrode which is solid instead of cross-hatched.