User's Manual

ManualsBrandsMICROCHIP TECHNOLOGY ManualsElectronicsNetwork Media Module

Table Of Contents

Operating Conditions
Features
WLAN
Bluetooth (Optional)
Memory Interfaces
Communication Interfaces
Audio and Graphics Interface
Input/Output
Applications
Table of Contents
Most Current Data Sheet
Errata
Customer Notification System
1.0 System Overview
- FIGURE 1-1: CY920 Based System Block Diagram
- 1.1 Connectors and Connections
  - 1.1.1 Module Connectors
  - 1.1.2 Antenna Connector
- 1.2 Pin Description
2.0 CY920 Board Layout and Features
- 2.1 Top View of CY920 Board
  - FIGURE 2-1: CY920 Board (Top View)
- 2.2 Bottom View of CY920 Board
  - FIGURE 2-2: CY920 Board (Bottom View)
- 2.3 Production Board with RF Shield (Top View)
  - FIGURE 2-3: CY920 Board with RF Shield (Top View)
- 2.4 Production Board with RF Shield (Bottom View)
  - FIGURE 2-4: CY920 Board with RF Shield (Bottom View)
3.0 Application Guidelines
- 3.1 Power Sequencing and Reset Timing
  - FIGURE 3-1: Power-up Sequence
- 3.2 RF Considerations
4.0 Wi-Fi Specification
- TABLE 4-1: Wi-Fi® Specifications (1, 2, 4, 5, 6) (Continued)
5.0 Bluetooth Specifications
- 5.1 Features
- 5.2 Bluetooth Radio Characteristics
  - TABLE 5-1: Radio Characteristics
6.0 Packaging Information
- FIGURE 6-1: CY920 Board Dimensions (Top View)
- FIGURE 6-2: CY920 Board Dimensions (Bottom View)
- 6.1 3D View of the CY920 Board
  - FIGURE 6-3: CY920 Board (3D View)
- 6.2 Module Weight
  - TABLE 6-1: Module Weight
7.0 Electrical Characteristics
- Absolute Maximum Ratings
8.0 Regulatory Compliance and Quality
- TABLE 8-1: Regulatory compliance
- 8.1 Antenna Considerations
  - TABLE 8-2: Antenna List
  - TABLE 8-3: Antennas for Various SKUs
- 8.2 CY920 Usage Guidelines under Modular Approval
- 8.3 Restriction of Use of Hazardous Substances (RoHS) Compliance
9.0 Ordering Guide
- TABLE 9-1: Ordering Guide(1)
Appendix A: Certification Notices
- Federal Communications Commission Interference Statement
- Labeling Requirements
- RF Exposure Warning
- Information for the OEMs or Integrators
- Information to be Supplied to the End User by the OEM or Integrator
- Japan
- Canada, Industry Canada (IC) Notices
- RF Exposure Information
- Canada, avis d'Industry Canada (IC)
- Informations concernant l'exposition aux fréquences radio (RF)
Appendix B: Revision History
- Revision A (January 2014)
- Revision B (March 2014)
- Revision C (June 2014)
The Microchip Web Site
Customer Change Notification Service
Customer Support

CY920

TABLE 1-13: JTAG

TABLE 1-14: VIDEO

TABLE 1-15: GPIO (MISCELLANEOUS)

Microchip has a set of example schematics that shows

how the external circuitry is typically connected to the

module. Please contact Microchip sales team for any

related documents or for any assistance.

Signal Type Description

TMS,TCK,TDI, TDO I/O JTAG ports for the DM920 SoC. Do not connect these pins.

Legend: O = Output I /O = Input /Output I = Input P = Power

Signal Type Description

AV0CLK O HD Clock

AV0CTRL0 O HD HSYNC

AV0CTRL1 O HD VSYNC

AV0CTRL2 O HD data enable, GPIO-07. This GPIO is available if HD interface is not

used.

HDDATA [15:0] O Lower 16 bits of HD video data

AV0DATA [3:0] O HDDATA [19:16]

AV1DATA [3:0] O HDDATA [23:20]

Legend: O = Output I /O = Input /Output I = Input P = Power

Signal Type Description

MII_CRS, MII_COL,

MII_TX_ER,MII_TXCLK

I/O GPIO-00, 01, 02, 03. It is used for Bluetooth control signals. For a

non-BT module, these signals can be used for other functions.

AV3CLK I/O GPIO-04, see Note 1

AV3CTRL0 I/O GPIO-05, see Note 1

MII_RXD3 I/O GPIO-11, see Note 1

HDDATA12 I/O GPIO-12, see Note 2

HDDATA13 I/O GPIO-13, see Note 2

HDDATA14 I/O GPIO-14, see Note 2

HDDATA15 I/O GPIO-15, see Note 2

SPF0 I/O GPIO-16, HD_INT (for systems with HDMI transmitter)

EXT_PA_EN1_5 I/O GPIO-18, FEM BSEL

EXT_PA_EN1_24 I/O GPIO-19, see Note 1

Legend: O = Output I /O = Input /Output I = Input P = Power

Note 1: These GPIOs are available.

2: These GPIOs are available if HD interface is not used.