User's Manual

JukeBlox Networked Media Modules – CX Series
Datasheet
SMSC CX860/CX870 28 Revision 2.2 (11-08-11)
SMSC CONFIDENTIAL
10 Revision Control
Revision Date / Author Details of Change Reason for Change
V2.2
(110811)
November 8,
2011 / SHs
Added CX870-3K option to Section 4 Ordering
Guide.
Added -3K option.
Updated title of Section 6.1 from “1 RoHS” to
“RoHS”.
Correcting typo.
In Section 10 Revision Control table, updated
an entry for V2.0 b in the Reason for Change
column from “RTV” to “RTC”
Correcting typo.
Removed “Preliminary Datasheet” from the
footer.
CX module is in production, so the datasheet is
no longer preliminary.
V2.1
(100711)
October 7,
2011 / SHs
Removed the word “Preliminary” from the title
page.
CX module is in production, so the datasheet is
no longer preliminary.
Updated Section 5.3 WiFi Specification “TX
Power” entry for 802.11g
Correspond to actual production test limits.
Updated Section 6.0.1 Antenna Considerations
with updated module numbering scheme
Revert to original module numbering scheme.
Updated Section 6.7 Module Quality with new
Defect Rate
Data is now available.
Updated Section 4.1 Part Number Syntax with
removal of Antenna Configuration number and
Note
Revert to original part numbering scheme.
V2.0
(100211)
October 2,
2011 / SHs
Updated Section 10 Revision Control with new
Reason for Change column
Corporate standard.
Change from BridgeCo logos and disclaimer
text to SMSC logos and disclaimer text
Corporate standard.
Updated location of red boxes in Section 3.2.1
CX870 Bottom View with 64-pin Low density
connector
Improve alignment of red box to photo.
Updated location of red boxes in Section 3.2.2
CX870 Bottom View with 120-pin Media
connector
Improve alignment of red box to photo.
Moved Section 5.3 WiFi Specification on to one
page
Improve readability.
Updated Customer Portal information in Section
6 Regulatory Compliance and Quality
Easier to access URL directly.
Reverted Antenna Considerations back to
Section 6.0.1; subsequently all subsections in
Section 6 reverted back to original numbering
Decided to keep original part numbering
scheme to avoid unnecessary paper work and
the need to redo certifications.
Updated Notes 11 & 12 in Section 8.2.1 Pin
Descriptions with updated Customer Portal
information
Easier to access URL directly.
V2.0
(092611)
Sept. 26,
2011 / SHs
Updated Table of Contents Keep TOC aligned with actual content.