User Manual
CONFIDENTIAL
© 2000~2013 ISSC Technologies Corp.
8
Appendix C: Reflow Profile
1.) Follow: IPC/JEDEC J-STD-020 C
2.) Condition:
Average ramp-up rate (217℃ to peak): 1~2℃/sec max.
Preheat:150~200C、60~180 seconds
Temperature maintained above 217℃ : 60~150 seconds
Time within 5℃ of actual peak temperature: 20 ~ 40 sec.
Peak temperature:250+0/-5℃ or 260+0/-5℃
Ramp-down rate : 3℃/sec. max.
Time 25℃ to peak temperature : 8 minutes max.
Cycle interval:5 minus
Slope: 1~2℃/ sec max.
(217℃ to peak)
217℃
Peak: 250+0/-5℃
Or 260+0/-5℃
Ramp down rate:
Max. 3℃/sec.
20~40 sec.
60~150 sec.60~180 sec.
25℃
Preheat: 150~200℃
Time (sec)
Appendix D: Label Information
FCC Label Instructions:
The outside of final products that contains this module device must display a label referring to the enclosed module.
This exterior label can use wording such as the following: “Contains Transmitter Module FCC
ID:A8TBM8NSPXSYC2A ” or “Contains FCC ID: A8TBM8NSPXSYC2A.” Any similar wording that expresses the