User Manual

1.3 Canada
The BM78SPPS5MC2 module has been certified for use in Canada under Industry Canada (IC) Radio
Standards Specification (RSS) RSS-210 and RSS-Gen. Modular approval permits the installation of a module
in a host device without the need to recertify the device.
1.3.1 LABELING AND USER INFORMATION REQUIREMENTS
Labeling Requirements for the Host Device (from Section 3.2.1, RSS-Gen, Issue 3, December 2010): The
host device shall be properly labeled to identify the module within the host device.
The Industry Canada certification label of a module shall be clearly visible at all times when installed in the
host device, otherwise the host device must be labeled to display the Industry Canada certification
number of the module, preceded by the words “Contains transmitter module”, or the word “Contains”, or
similar wording expressing the same meaning, as follows:
User Manual Notice for License-Exempt Radio Apparatus (from Section 7.1.3 RSS-Gen, Issue 3, December
2010): User manuals for license-exempt radio apparatus shall contain the following or equivalent notice in
a conspicuous location in the user manual or alternatively on the device or both:
Contains transm
itter module IC: 12246A
-
BM7
8SPPS5M2
This device complies with Industry Canada license
-
exem
pt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
PENDING