User Manual

1.8V LDO
(*1)(*2) Min Typ Max Unit
Operation Temperature -20 70
℃
Input Voltage (V
in
)
(*3)
2.0 3.6 V
Output Current (V IN =3.0v/load regulation with
80m
V
drop
)
100 mA
Quiescent Current (V
in
<3.0V) 13 uA
1) With 1uF capacitors at LDO18_O as the condition of IP verification.
2) Output voltage can calibration by MP tool
3.3V LDO
(*1)(*2) Min Typ Max Unit
Operation Temperature -20 70
℃
Input Voltage (V
in
) 3.2 4.3 V
Output Current (V IN =3.6v / load regulation with
100mV drop)
100 mA
Quiescent Current(V IN =3.6v) 150 uA
1) With 10uF capacitor at LDO33_O as the condition of IP verification
2) Output voltage can calibration by MP tool
PMU LDO
(*1)(*2) Min Typ Max Unit
Operation Temperature -20 70
℃
Input Voltage (V
in
) 3.2 4.3 V
Output Current (VIN=3.6v / load regulation
with
0.3
mV drop
)
100 uA
Quiescent Current(VIN=3.6v) 120 uA
1) With 1uF capacitor at PMULDO_O as the condition of IP verification.
2) Output voltage can calibration by MP tool
SAR‐ADC and Battery Voltage Detector
Min Typ Max Unit
Operation Temperature -20 70
℃
AVDD_SAR power supply 1.8 V
SAR_BAT(BAT_IN) 1.1 4.5 V
Resolution 10 bit