User Manual

Advance Information
Revision 0.4 12/2015
D
S
60001372
C
-
P
age
59
BM71 Regulatory Compliance Information
A.5.1
LABELING AND USER
INFORMATION REQUIREMENTS
The label on the final product which contains the BM71
module must follow KC marking requirements. The
integrator of the module should refer to the labeling
requirements for Korea available on the Korea Com-
munications Commission (KCC) website.
The BM71 module due to the limited size(9.0 x
11.5mm) the KC mark and identifier is displayed in the
Datasheet only and cannot be displayed on the
module label. .
The final product requires the KC mark and certificate
number of the module:
A.5.2
HELPFUL WEB SITES
Korea Communications Commission (KCC):
http://www.kcc.go.kr
National Radio Research Agency (RRA):
http://rra.go.kr
A.6
Taiwan
The BM71 module has pending compliance approval in
accordance with the Telecommunications Act. Custom-
ers seeking to use the compliance approval in their
product should contact Microchip Technology sales or
distribution partners to obtain a Letter of Authority.
Integration of this module into a final product does not
require additional radio certification provided installa-
tion instructions are followed and no modifications of
the module are allowed.
A.6.1
LABELING AND USER
INFORMATION REQUIREMENTS
The BM71 module due to the limited size(9.0 x
11.5mm) the NCC mark and identifier is displayed in
the Datasheet only and cannot be displayed on the
module label :
The user's manual should contain below warning (for
RF device) in traditional Chinese:
!
使
使
使
A.6.2
HELPFUL WEB SITES
National Communications Commission (NCC):
http://www.ncc.gov.tw
A.7 Other Regulatory Jurisdictions
Should other regulatory jurisdiction certification be
required by the customer, or the customer need to
recertify the module for other reasons, contact Micro-
chip for the required utilities and documentation.
LABEL