User Manual

BM71 Regulatory Compliance Information
Advance Information
Revision 0.4 12/2015
D
S
60001372
C
-
P
age
58
TABLE A-1: EUROPEAN COMPLIANCE TESTING
Certification Standards Article Laboratory Report Number Date
Safety EN60950-1:2006/A11:2010/A1:2010/
A12:2011/A2:2013
3(1)(a)
TUV
Rheinland
10053210 001 -
Health
EN62479:2010
10053433 001 -
EMC
EN301489
-
1
V1.9.2
3(1)(b)
10052964 001 -
EN301489
-
17
V2.2.1
Radio
EN300328
V1.9.1
3(2)
10053433 001 -
Notified
Body
-
- -
A.3.3 HELPFUL WEB SITES
A document that can be used as a starting point in
understanding the use of Short Range Devices (SRD)
in Europe is the European Radio Communications
Committee (ERC) Recommendation 70-03 E, which
can be downloaded from the European Radio Commu-
nications Office (ERO) at: http://www.ero.dk/. Addi-
tional helpful web sites are:
• Radio and Telecommunications Terminal Equip-
ment (R&TTE):
http://ec.europa.eu/enterprise/rtte/index_en.htm
• European Conference of Postal and Telecommu-
nications Administrations (CEPT):
http://www.cept.org
• European Telecommunications Standards Insti-
tute (ETSI):
http://www.etsi.org
• European Radio Communications Office (ERO):
http://www.ero.dk
• The Radio and Telecommunications Terminal
Equipment Compliance Association (R&TTE CA):
http://www.rtteca.com
A.4 Japan
The BM71 module has received type certification and
is labeled with its own technical conformity mark and
certification number as required to conform to the tech-
nical standards regulated by the Ministry of Internal
Affairs and Communications (MIC) of Japan pursuant
to the Radio Act of Japan.
Integration of this module into a final product does not
require additional radio certification provided installa-
tion instructions are followed and no modifications of
the module are allowed. Additional testing may be
required:
• If the host product is subject to electrical appli-
ance safety (for example, powered from an AC
mains), the host product may require Product
Safety Electrical Appliance and Material (PSE)
testing. The integrator should contact their confor-
mance laboratory to determine if this testing is
required.
• There is an voluntary Electromagnetic Compatibil-
ity (EMC) test for the host product administered
by VCCI: http://www.vcci.jp/vcci_e/index.html
A.4.1 LABELING AND USER
INFORMATION REQUIREMENTS
The label on the final product which contains the BM71
module must follow Japan marking requirements. The
integrator of the module should refer to the labeling
requirements for Japan available at the Ministry of
Internal Affairs and Communications (MIC) website.
The BM71 module is labeled with its own technical con-
formity mark and certification number. The final product
in which this module is being used must have a label
attach on the top side of module and another one
referring to the type certified module inside:
A.4.2 HELPFUL WEB SITES
Ministry of Internal Affairs and Communications (MIC):
http://www.tele.soumu.go.jp/e/index.htm
Association of Radio Industries and Businesses
(ARIB): http://www.arib.or.jp/english/
A.5 Korea
The BM71 module has received certification of confor-
mity in accordance with the Radio Waves Act. Integra-
tion of this module into a final product does not require
additional radio certification provided installation
instructions are followed and no modifications of the
module are allowed.