User Manual

ManualsBrandsMicrochip Technology ManualsElectronicsBluetooth Module

rel

mina

Revision 0.3 5/2016

60001372

age

BM64 Regulatory Compliance Information

TABLE A-1: EUROPEAN COMPLIANCE TESTING

Certification

Standards Article

Laboratory

Report Number

Safety

EN60950-1:2006/A11:2010/A1:2010/

A12:2011/A2:2013

3(1)(a)

TUV

Rheinland

xxxxxxxx xxx

Health

479:2010

xxxxxxxx xxx

EMC

EN301489

V1.9.2

3(1)(b)

xxxxxxxx xxx

EN301489

V2.2.1

Radio

EN300328

V1.9.1

3(2)

xxxxxxxx xxx

Notified

Body

A.3.3

HELPFUL WEB SITES

A document that can be used as a starting point in

understanding the use of Short Range Devices (SRD)

in Europe is the European Radio Communications

Committee (ERC) Recommendation 70-03 E, which

can be downloaded from the European Radio Commu-

nications Office (ERO) at: http://www.ero.dk/. Addi-

tional helpful web sites are:

• Radio and Telecommunications Terminal Equip-

ment (R&TTE):

http://ec.europa.eu/enterprise/rtte/index_en.htm

• European Conference of Postal and Telecommu-

nications Administrations (CEPT):

http://www.cept.org

• European Telecommunications Standards Insti-

tute (ETSI):

http://www.etsi.org

• European Radio Communications Office (ERO):

http://www.ero.dk

• The Radio and Telecommunications Terminal

Equipment Compliance Association (R&TTE CA):

http://www.rtteca.com

A.4

Japan

The BM64 module has received type certification and

is labeled with its own technical conformity mark and

certification number as required to conform to the tech-

nical standards regulated by the Ministry of Internal

Affairs and Communications (MIC) of Japan pursuant

to the Radio Act of Japan.

Integration of this module into a final product does not

require additional radio certification provided installa-

tion instructions are followed and no modifications of

the module are allowed. Additional testing may be

required:

• If the host product is subject to electrical appli-

ance safety (for example, powered from an AC

mains), the host product may require Product

Safety Electrical Appliance and Material (PSE)

testing. The integrator should contact their confor-

mance laboratory to determine if this testing is

required.

• There is an voluntary Electromagnetic Compatibil-

ity (EMC) test for the host product administered

by VCCI: http://www.vcci.jp/vcci_e/index.html

A.4.1

LABELING AND USER

INFORMATION REQUIREMENTS

The label on the final product which contains the BM64

module must follow Japan marking requirements. The

integrator of the module should refer to the labeling

requirements for Japan available at the Ministry of

Internal Affairs and Communications (MIC) website.

The BM64 module is labeled with its own technical con-

formity mark and certification number.

A.4.2

HELPFUL WEB SITES

Ministry of Internal Affairs and Communications (MIC):

http://www.tele.soumu.go.jp/e/index.htm

Association of Radio Industries and Businesses

(ARIB): http://www.arib.or.jp/english/

A.5

Korea

The BM64 module has received certification of confor-

mity in accordance with the Radio Waves Act. Integra-

tion of this module into a final product does not require

additional radio certification provided installation

instructions are followed and no modifications of the

module are allowed.

‘Pending’