User Manual

BM62/64
Preliminary
DS60001403C-Page 64
 2017 Microchip Technology Inc.
TABLE A-3: EUROPEAN COMPLIANCE TESTING (BM64SPKS1MC2/BM64SPKA1MC2)
Certification
Standards
Article
Laboratory
Report Number
Date
Safety
EN 60950-1:2006+A11:2009+A1:
2010+A12:2011+A2:2013
[3.1(a)]
TUV,
Rheinland,
Taiwan
10055925 001
2016-04-20
Health
ETSI EN 300 328 V1.9.1
EN 62479:2010
10055788 001
(BDR/EDR)
2016-04-29
10055787 001
(BLE)
EMC
ETSI EN 301 489-1 V1.9.2
ETSI EN 301 489-17 V2.2.1
[3.1(b)]
10055200 001
(Shield)
2016-05-19
10055202 001
(No shield)
Radio
ETSI EN 300 328 V1.9.1
(3.2)
10055788 001
(BDR/EDR)
2016-04-29
10055787 001
(BLE)
Notified Body
Type Examination Certificate by
Notified Body TRLP (0197)
—
50053216 001
(BM64SPKS1MC2)
2016-09-02
50053215 001
(BM64SPKA1MC2)
A.3.3 HELPFUL WEBSITES
A document that can be used as a starting point in
understanding the use of Short Range Devices (SRD)
in Europe is the European Radio Communications
Committee (ERC) Recommendation 70-03 E, which
can be downloaded from the European Communica-
tions Committee (ECC) at: http://www.ecodocdb.dk/
Additional helpful web sites are:
• Radio Equipment Directive (2014/53/EU):
https://ec.europa.eu/growth/single-market/euro-
pean-standards/harmonised-standards/rtte_de
• European Conference of Postal and Telecommu-
nications Administrations (CEPT):
http://www.cept.org
• European Telecommunications Standards Insti-
tute (ETSI):
http://www.etsi.org
• European Communications Committee (ECC):
http://www.ecodocdb.dk
• The Radio Equipment Directive Compliance
Association (REDCA):
http://www.redca.eu/
A.4 Japan
The BM62/BM64C1/BM64C2 Stereo Audio module
has received type certification and is labeled with its
own technical conformity mark and certification number
as required to conform to the technical standards regu-
lated by the Ministry of Internal Affairs and Communi-
cations (MIC) of Japan pursuant to the Radio Act of
Japan.
Integration of this module into a final product does not
require additional radio certification provided installa-
tion instructions are followed and no modifications of
the module are allowed. Additional testing may be
required:
• If the host product is subject to electrical appli-
ance safety (for example, powered from an AC
mains), the host product may require Product
Safety Electrical Appliance and Material (PSE)
testing. The integrator must contact their confor-
mance laboratory to determine if this testing is
required
• There is an voluntary Electromagnetic Compatibil-
ity (EMC) test for the host product administered
by VCCI: http://www.vcci.jp/vcci_e/index.html
A.4.1 LABELING AND USER
INFORMATION REQUIREMENTS
The label on the final product which contains the
BM62/BM64C1/BM64C2 Stereo Audio module must
follow Japan marking requirements. The integrator of
the module must refer to the labeling requirements for
Japan available at the Ministry of Internal Affairs and
Communications (MIC) website.