User Manual

Stereo Module

2015 Microchip Technology Inc.
Page 43
P
reliminary
Edition
A.4 Japan
The BM20/BM23 module has received type certification and is labeled with its own
technical conformity mark and certification number as required to conform to the technical
standards regulated by the Ministry of Internal Affairs and Communications (MIC) of
Japan pursuant to the Radio Act of Japan.
Integration of this module into a final product does not require additional radio certification
provided installation instructions are followed and no modifications of the module are
allowed. Additional testing may be required:
• If the host product is subject to electrical appliance safety (for example, powered
from an AC mains), the host product may require Product Safety Electrical
Appliance and Material (PSE) testing. The integrator should contact their
conformance laboratory to determine if this testing is required.
• There is an voluntary Electromagnetic Compatibility (EMC) test for the
host product administered by VCCI: http://www.vcci.jp/vcci_e/index.html
A.4.1 LABELING AND USER INFORMATION REQUIREMENTS
The label on the final product which contains the BM20/BM23 module must follow
Japan marking requirements. The integrator of the module should refer to the
labeling requirements for Japan available at the Ministry of Internal Affairs and
Communications (MIC) website.
The BM20/BM23 module is labeled with its own technical conformity mark and certification
number. The final product in which this module is being used must have a label referring to
the type certified module inside:
Contains transmitter module with certificate number:
A.4.2 HELPFUL WEB SITES
Ministry of Internal Affairs and Communications (MIC):
http://www.tele.soumu.go.jp/e/index.htm Association of Radio Industries and Businesses
(ARIB): http://www.arib.or.jp/english/