User Manual

ManualsBrandsMicrochip Technology ManualsElectronicsBluetooth Module

Stereo Module



2015 Microchip Technology Inc.

Page 37

reliminary

Edition

APPENDIX

A.1 United States

The module has received Federal Communications Commission (FCC) CFR47

Telecommunications, Part 15 Subpart C “Intentional Radiators” modular approval in

accordance with

Part 15.212 Modular Transmitter approval. Modular approval allows the

end user to integrate the module into a finished product without obtaining subsequent and

separate FCC approvals for intentional

radiation, provided no changes or modifications are

made to the module circuitry. Changes or

modifications could void the user’s authority to

operate the equipment. The end user must comply with

all of the instructions provided by

the Grantee, which indicate installation and/or operating conditions

necessary for

compliance.

The finished product is required to comply with all applicable FCC equipment

authorizations regulations,

requirements and equipment functions not associated with the

transmitter module portion. For

example, compliance must be demonstrated to regulations

for other transmitter components within the

host product; to requirements for unintentional

radiators (Part 15 Subpart B “Unintentional Radiators”),

such as digital devices, computer

peripherals, radio receivers, etc.; and to additional authorization

requirements for the non‐

transmitter functions on the transmitter module (i.e., Verification, or

Declaration of

Conformity) (e.g., transmitter modules may also contain digital logic functions) as

appropriate.

A.1.1 LABELING AND USER INFORMATION REQUIREMENTS

The module has been labeled with its own FCC ID number, and if the FCC ID is not visible

when

the module is installed inside another device, then the outside of the finished product

into which the

module is installed must also display a label referring to the enclosed module.

This exterior label can use

wording as follows:

Contains Transmitter Module FCC ID:

A8TBM23SPKXYC2A

Contains FCC ID: A8TBM23SPKXYC2A

This device complies with Part 15 of the FCC Rules. Operation

is subject to the

following two conditions: (1) this device may

not cause harmful interference,

and (2) this device must accept

any interference received, including

interference that may

cause undesired operation

A user’s manual for the finished product should include the following statement: