User Manual

Stereo Module

2015 Microchip Technology Inc.
Page 16
P
reliminary
Edition
The clock and data timing as below:
FIGURE 2-11: TIMING FOR I
2
S MODES (both master and slave)
FIGURE 2-12: TIMING FOR PCM MODES (both master and slave)
2.3 RESET (RST_N)
RST is module reset pin which is active LOW. To reset the module, the RST_N must hold LOW for at
least 63ns.
2.4 STATUS LED (LED1, LED2)
The status LED provide below status indication:
 Standby
 Inquiry
 Link
 Link Back
 Low Battery
 Page
 Battery Charging
Each status indication LED flashing sequence and brightness is configurable by UI tool.