Datasheet

16
Analog & Interface Product Selector Guide
POWER MANAGEMENT: Battery Chargers (Continued)
Part # Mode Cell Type
# of
Cells
Vcc
Range (V)
Cell Voltage (V)
Maximum
Charging
Current (mA)
Max. Voltage
Regulation
(%)
Int/Ext
FET
Features Packages
MCP73841 Linear Li-Ion/Li-Polymer 1 4.5 to 12 4.1, 4.2 N/A ±0.5 Ext
Safety charge timers, Temperature monitor, Charge current set by external FET
10-pin MSOP
MCP73842 Linear Li-Ion/Li-Polymer 2 8.7 to 12 8.2, 8.4 N/A ±0.5 Ext
Safety charge timers, Temperature monitor, Charge current set by external FET
10-pin MSOP
MCP73843 Linear Li-Ion/Li-Polymer 1 4.5 to 12 4.1, 4.2 N/A ±0.5 Ext Safety charge timers, Charge current set by external FET 8-pin MSOP MCP73844 Linear Li-Ion/Li-Polymer 2 8.7 to 12 8.2, 8.4 N/A ±0.5 Ext Safety charge timers, Charge current set by external FET 8-pin MSOP MCP73811 Linear Li-Ion/Li-Polymer 1 3.7 to 6.0 4.2 500 ±1.0 Int
Selectable charge current (100 mA, 500 mA), Charge enable input
5-pin SOT-23
MCP73812 Linear Li-Ion/Li Polymer 1 3.7 to 6.0 4.2 500 ±1.0 Int
Programmable charge current (100 mA, 500 mA), Charge enable input
5-pin SOT-23
MCP73830/L Linear Li-Ion/Li-Polymer 1 3.75 to 6.0 4.2 1000/200 ±0.75 Int Soft-start, Charge enable pin 6-pin 2×2 TDFN MCP73831 Linear Li-Ion/Li-Polymer 1 3.7 to 6.0 4.2, 4.35, 4.4, 4.5 500 ±0.75 Int
UVLO, Thermal regulation, Programmable charge current, Tri-state STAT pin
5-pin SOT-23, 8-pin 2×3 DFN
MCP73832 Linear Li-Ion/Li-Polymer 1 3.7 to 6.0 4.2, 4.35, 4.4, 4.5 500 ±0.75 Int
UVLO, Thermal regulation, Programmable charge current, Open-drain STAT pin
5-pin SOT-23, 8-pin 2×3 DFN
MCP73853 Linear Li-Ion/Li-Polymer 1 4.5 to 5.5 4.1, 4.2 500 ±0.5 Int
USB control, Safety charge timers, Temperature monitor, Thermal regulation
16-pin 4×4 QFN
MCP73855 Linear Li-Ion/Li-Polymer 1 4.5 to 5.5 4.1, 4.2 500 ±0.5 Int USB control, Safety charge timers, Thermal regulation 10-pin 3×3 DFN MCP73833 Linear Li-Ion/Li-Polymer 1 3.7 to 6.0 4.2, 4.35, 4.4, 4.5 1000 ±0.75 Int
UVLO, Thermal regulation, Thermistor input, LDO Test mode, Multiple V
reg outputs, Safety timer, Power good output
10-pin 3×3 DFN, 10-pin MSOP
MCP73834 Linear Li-Ion/Li-Polymer 1 3.7 to 6.0 4.2, 4.35, 4.4, 4.5 1000 ±0.75 Int
UVLO, Thermal regulation, Thermistor input, LDO Test mode, Multiple Vreg outputs, Safety timer, Timer enable input
10-pin 3×3 DFN, 10-pin MSOP
MCP73837 Linear Li-Ion/Li-Polymer 1 3.7 to 6.0 4.2, 4.35, 4.4, 4.5 1000 ±0.75 Int
Dual input (USB, DC input from adapter) auto-switching, UVLO, Thermal regulation, Thermistor input, Power good output
10-pin 3×3 DFN, 10-pin MSOP
MCP73838 Linear Li-Ion/Li Polymer 1 3.7 to 6.0 4.2, 4.35, 4.4, 4.5 1000 ±0.75 Int
Dual input (USB, DC input from adapter) auto-switching, UVLO, Thermal regulation, Timer enable input
10-pin 3×3 DFN, 10-pin MSOP
MCP73871 Linear Li-Ion/Li-Polymer 1 3.75 to 6.0 4.1, 4.2, 4.35, 4.4
1500 (A/C
Adapter)
500 (USB)
±0.5 Int
Simultaneous charging of load and battery, Load-dependent charging, Multiple programmable charge currents
20-pin 4×4 QFN, 20-pin SSOP
POWER MANAGEMENT: Hot Swap Controllers
Part # Number of Outputs
Vpos to Vneg
Differential Voltage
(V)
Junction
Temperature
Range (°C)
OVLO UVLO Power good Int/Ext FET Applications Packages
MCP18480 1 −0.3 to +15.0 −40 to +85 Adjustable Adjustable Adjustable Ext −48V Telecom/Datacom, Bus/Backplane 20-pin SSOP
lInear
LINEAR: Op Amps
Part #
# per
Package
GBWP
Iq Typical
(µA)
Vos Max
(mV)
Typical Input
Bias Current
(pA)
Input Voltage
Noise Density
(nV/rtHz)
Operating
Voltage (V)
Temperature
Range (°C)
Features Packages
MCP6441 1 9 kHz 0.45 4.5 1 190
(1)
1.8 to 6.0 −40 to +125 Rail-to-Rail Input/Output 5-pin SOT-23
(S)
, 5-pin SC-70
(S)
MCP6442 2 9 kHz 0.45 4.5 1 190
(1)
1.8 to 6.0 −40 to +125 Rail-to-Rail Input/Output 8-pin SOIC, 8-pin MSOP, 8-pin 2×3 TDFN
MCP6444 4 9 kHz 0.45 4.5 1 190
(1)
1.8 to 6.0 −40 to +125 Rail-to-Rail Input/Output 14-pin SOIC, 14-pin TSSOP
MCP6031 1 10 kHz 0.9 0.15 1 165
(1)
1.8 to 5.5 −40 to +125 Rail-to-Rail Input/Output 8-pin SOIC, 8-pin MSOP, 8-pin 2×3 DFN, 5-pin SOT-23
MCP6032 2 10 kHz 0.9 0.15 1 165
(1)
1.8 to 5.5 −40 to +125 Rail-to-Rail Input/Output 8-pin SOIC, 8-pin MSOP
MCP6033 1 10 kHz 0.9 0.15 1 165
(1)
1.8 to 5.5 −40 to +125 Rail-to-Rail Input/Output, Chip select 8-pin SOIC, 8-pin MSOP, 8-pin 2×3 DFN
MCP6034 4 10 kHz 0.9 0.15 1 165
(1)
1.8 to 5.5 −40 to +125 Rail-to-Rail Input/Output 14-pin SOIC, 14-pin TSSOP
MCP6041 1 14 kHz 0.6 3 1 170
(1)
1.4 to 6.0 −40 to +125 Rail-to-Rail Input/Output 8-pin PDIP, 8-pin SOIC, 8-pin MSOP, 5-pin SOT-23
(S)
Legend: S = Standard Pinout; R = Reverse Pinout; U = Alternative Pinout Note 1: Values are typical at 1 kHz
2: Values are typical at 10 kHz