User manual

Atmel AT02657: XMEGA-E5 Xplained Software User Guide [APPLICATION NOTE]
42085A−AVR−04/2013
10
3. Building a New Application on the XMEGA-E5 Xplained
The main ways to create a new application on XMEGA-E5 Xplained kit with Atmel Studio 6 and ASF are to create a
“New Project” or to create a “New Example Project from ASF”.
3.1 New project on XMEGA-E5 Xplained
When “New Project” is selected in Atmel Studio 6, the XMEGA-E5 Xplained kit is available in the Atmel board list. Thus,
an empty project with the XMEGA-E5 Xplained kit definitions is created and allows adding several ASF modules
(drivers, components and services) through ASF Wizard.
3.2 New example project from ASF on XMEGA-E5 Xplained
Several XMEGA-E5 Xplained examples are available through the Atmel Software Framework (ASF). Atmel Studio 6
includes ASF, and the examples are available as a new example project naming “XMEGA-E5 Xplained”. These
examples can be used to start and build a new application.