User manual

Atmel AVR1926
7
8439A-AVR-09/11
4.3 Connecting AVR JTAGICE mkII
The grey connector on the Atmel AVR JTAGICE mkII probe has to be used when
connecting to the Atmel AVR XMEGA-B1 Xplained board. See Figure 4-2 for
referen
ce on how to make this connection.
Figure 4-2. Connecting the AVR JTAGICE mkII to the XMEGA-B1 Xplained board.
4.4 Connecting AVR ONE!
Standoff Adaptor nr.3 JTAG/ISP ref. A08-0254.
The green standoff adaptor nr.3 (ref. A08-0254) on the Atmel AVR ONE! probe has to
be used when connecting to the XMEGA-B1 Xplained board as shown in Figure 4-3.