User manual

Atmel AVR1926
11
8439A-AVR-09/11
• Open the USB port to connect to the target
• Select the hexadecimal file to load
NOTE The Atmel AVR XMEGA-B1 Xplained Demonstration hexadecimal file is available in
the application note: AVR1619: XMEGA-B1 Xplained Demonstration.
• Select the ‘Erase’, ‘Blank Check’, ‘Program’ and ‘Verify’ operation check boxes.
Then press the ‘Run’ button.
You should get confirmation in the bottom section of the window that the flash was
successfully programmed and verified.
Press ‘Start Application’ button.