Datasheet

51
XMEGA D4 [DATASHEET]
8135P–AVR–01/2014
Table 28-3. Port C - alternate functions.
Notes: 1. Pin mapping of all TC0 can optionally be moved to high nibble of port
2. If TC0 is configured as TC2 all eight pins can be used for PWM output.
3. Pin mapping of all USART0 can optionally be moved to high nibble of port.
4. Pins MOSI and SCK for all SPI can optionally be swapped.
5. CLKOUT can optionally be moved between port C, D and E and between pin 4 and 7.
6. EVOUT can optionally be moved between port C, D and E and between pin 4 and 7.
Table 28-4. Port D - alternate functions.
Table 28-5. Port E - alternate functions.
PORT C PIN# INTERRUPT TCC0
(1)(2)
AWEXC TCC1 USARTC0
(3)
SPIC
(4)
TWIC CLOCKOUT
(5)
EVENTOUT
(6)
GND 8
VCC 9
PC0 10 SYNC OC0A OC0ALS SDA
PC1 11 SYNC OC0B OC0AHS XCK0 SCL
PC2 12 SYNC/ASYNC OC0C OC0BLS RXD0
PC3 13 SYNC OC0D OC0BHS TXD0
PC4 14 SYNC OC0CLS OC1A SS
PC5 15 SYNC OC0CHS OC1B MOSI
PC6 16 SYNC OC0DLS MISO clk
RTC
PC7 17 SYNC OC0DHS SCK clk
PER
EVOUT
PORT D PIN # INTERRUPT TCD0 USARTD0 SPID CLOCKOUT EVENTOUT
GND 18
VCC 19
PD0 20 SYNC OC0A
PD1 21 SYNC OC0B XCK0
PD2 22 SYNC/ASYNC OC0C RXD0
PD3 23 SYNC OC0D TXD0
PD4 24 SYNC SS
PD5 25 SYNC MOSI
PD6 26 SYNC MISO
PD7 27 SYNC SCK clk
PER
EVOUT
PORT E PIN # INTERRUPT TCE0 TWIE
PE0 28 SYNC OC0A SDA
PE1 29 SYNC OC0B SCL
GND 30